A Mason company - serving Las Vegas, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Delta · Las Vegas

Delta Construction Service in Las Vegas, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Las Vegas
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Las Vegas Homeowners Choose Delta Construction

Mason Remodeling Co Las Vegas provides independent Delta construction service across the Las Vegas Valley: repair and replacement of Delta faucets, shower valves, and fixtures, plus the kitchen and bath remodeling work those fixtures live inside. We are not affiliated with, authorized by, or endorsed by Delta, and we don’t claim to be. What we bring is daily, hands-on familiarity with the parts that fail in this valley’s hard water and the remodel decisions that make a repair last.

Call (844) 797-1112

Las Vegas construction is defined by building on a desert that was never meant to hold a city. Extreme heat cycling, expansive soils, and monsoon flash floods mean every slab, roof, and drainage plan has to be engineered for conditions that would be overkill almost anywhere else, and the plumbing inside those walls takes the same beating. Stucco-on-frame tract homes built through the 1990s and 2000s hold most of the Delta fixtures we see, with older block homes downtown and the Historic Westside carrying earlier generations of the same hardware.

Call (844) 797-1112 for a free estimate.

Why Trust Mason Remodeling Co Las Vegas for Your Delta Construction?

A tile setter installing wall tile in a shower

Delta fixtures are everywhere in Las Vegas homes. That means our technicians have pulled, rebuilt, and replaced a lot of them, from Touch2O kitchen faucets to Monitor 13/14 series shower valves. Our technicians have up to 22 years of experience, and that time shows up in the small things: knowing which cartridge a 2006 Monitor valve takes without a second trip, and knowing when a scaled valve body is past saving.

We source OEM Delta cartridges, solenoids, and aerators whenever they’re available, because aftermarket electronics and valve stems are where callbacks come from. On older models where OEM parts are discontinued, quality aftermarket seals and O-rings are a fair choice and we’ll say so. We won’t tell you a rebuild will outlast a replacement when it won’t.

Every crew member is background-checked and identity-verified under The Threshold Standard, arrives in a clean marked uniform, and shows a photo ID badge at the door. You get the technician’s name and photo before the visit. Every Delta job comes with a written price before any work starts, and the 365-Day Done Right Promise covers the work for a year from completion. A live person answers the phone around the clock.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Delta Construction Problems We Fix in Las Vegas

The failures below are the ones we handle most often in Las Vegas. They’re specific to Delta’s product families, and they’re specific to this valley’s water and heat.

  • Touch2O solenoid failure. The Touch2O kitchen faucet stops responding to touch, won’t shut off reliably, or turns itself on. The solenoid is the electronic actuator behind the touch function, and it’s the part that fails first. Hard water and heat cycling inside the cabinet speed it up. In most cases a new OEM solenoid fixes it without touching the faucet body.
  • Monitor cartridge scale buildup. A Monitor 13/14 series shower valve starts drifting in temperature or the handle gets stiff. The pressure-balancing cartridge inside has scaled up from Las Vegas water, which runs hard across most of the valley. The cartridge is a wear item; the valve body usually isn’t. Swapping the cartridge is the standard fix.
  • Aerator and sprayer head clogging. Flow drops at the spout or the sprayer loses pressure. Mineral deposits close off the aerator screen and sprayer ports over time. Cleaning or replacing those parts restores flow for a few dollars in parts, which is why we check them before quoting anything bigger.
  • Finish pitting and peeling on Foundations fixtures. The lower-cost Delta Foundations line can pit or peel in wet areas, especially around the escutcheon and spout base where water sits. Once the finish is failing on a basic fixture, another repair often costs more than it’s worth.
  • Stiff or leaking handles on Classic and Trinsic faucets. A hard-turning handle or a slow drip at the base usually traces to a worn stem, seat, or O-ring. Trinsic’s single-handle design and Classic’s widespread bodies wear differently, so the parts list differs. We identify the exact model before ordering.

One pattern worth naming: in Las Vegas, a shower valve that ran fine for years often starts drifting temperature in late spring, right as the first 110°F stretch hits. The scale was already there; the heat just makes the balancing cartridge’s job harder.

Delta Parts & Our Repair-vs-Replace Approach

A whole-home remodel with the living, dining and kitchen areas opened up

We use OEM Delta cartridges, solenoids, and aerators on the jobs where long-term reliability matters, which is most of them. For older Delta models where the OEM part is discontinued, quality aftermarket seals and O-rings are an acceptable substitute and we’ll explain the trade-off before you decide.

Parts are sourced per job. We don’t claim to stock Delta parts locally, so the model and serial number off your fixture matter; they’re what let us order the right cartridge the first time.

Repair beats replacement when the valve body is sound and the finish is holding. Replacement wins when the valve body is cracked, the finish is failing across the fixture, or a third repair on the same worn faucet would cost more than a new one. Walk-in shower projects are where this decision comes up most: if the wall is already open, upgrading the valve to a current Monitor rough-in while the shower is being built usually costs far less than doing it later.

Call (844) 797-1112 and we’ll give you a straight answer on repair versus replace, with the price in writing.

Our Delta Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact Delta model and series, then test the specific component: solenoid resistance on a Touch2O, cartridge function on a Monitor valve, flow at the aerator and sprayer. You get a written price before any work starts.
  2. 2
    Repair or install. OEM parts go in where they’re available. Cartridge swaps include flushing the valve body so new seals aren’t sitting on old scale. Fixture replacements get the new rough-in checked against the existing supply lines.
  3. 3
    Test. We run the faucet or shower through hot and cold cycles, check for leaks at the supply and drain connections, and confirm the touch or handle response works the way it should.
  4. 4
    Warranty. The work is covered by the 365-Day Done Right Promise: 365 days from the completion date. If the repair or installation fails, we come back at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Delta Products We Service & Install in Las Vegas

A wide opening with a new beam where the kitchen wall was removed

We work on Delta Touch2O kitchen faucets, Monitor 13 and 14 series shower valves, Classic and Foundations bath and kitchen faucets, and the Trinsic and Cassidy collections. Those cover most of what’s installed in Las Vegas homes. Full kitchen remodeling, walk-in shower installation, and bathroom vanity installation all put Delta fixtures at the center of the job, which is why we handle the fixture side and the construction side together.

Typical Delta-related project pricing in Las Vegas
Project Price range
Full Kitchen Remodeling $14,000 – $45,000
Walk-In Shower Installation $4,500 – $12,000
Bathroom Vanity Installation $800 – $3,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500

Here’s how a typical repair usually goes. A homeowner notices the Delta Touch2O kitchen faucet won’t shut off reliably, or the handle feels stiff and the water temperature drifts. The usual cause is a failed solenoid or a mineral-scaled Monitor cartridge. A qualified local pro tests the solenoid, replaces the cartridge with an OEM part, and flushes the valve, which often resolves the problem without replacing the whole faucet.

We Also Service These Brands

Delta is one of several brands we work with, not the only one. If your kitchen or bath mixes KraftMaid cabinetry, Kohler fixtures, Cambria or Silestone surfaces, or Toto toilets with Delta hardware, that’s a normal Las Vegas combination and one team can handle all of it. One written price covers the whole project.

FAQs – Delta Construction Service in Las Vegas

Is Mason Remodeling Co Las Vegas authorized by Delta? No. We’re an independent Delta service provider and we’re not affiliated with, authorized by, or endorsed by Delta. We work with Delta fixtures because they’re common in Las Vegas homes and we know the parts. Your manufacturer warranty terms stay between you and Delta.

Do you use genuine Delta OEM parts? Yes, we use OEM Delta cartridges, solenoids, and aerators wherever they’re available. On older models where the OEM part is discontinued, we’ll explain the aftermarket option and let you decide.

How long does Delta service take? Most single-fixture repairs, like a Monitor cartridge swap or solenoid replacement, are finished in one visit. Installations and remodel work depend on scope, and you’ll have the timeline in writing before anything starts. Call (844) 797-1112 for an estimate.

What Delta models and series do you cover? Touch2O kitchen faucets, Monitor 13 and 14 series shower valves, Classic and Foundations faucets, and the Trinsic and Cassidy collections. If you’re not sure which model you have, the serial number under the escutcheon or on the faucet body usually tells us.

Will service void my Delta warranty? Servicing a fixture with correct OEM parts is standard maintenance, not a modification. We can’t speak for Delta’s warranty decisions, since we’re independent, but we use parts that keep the fixture in its original configuration. We’ll say so if a repair would change that.

My Delta Touch2O faucet turns on by itself – what’s the fix? A failed solenoid is the most likely cause. The solenoid controls the touch response, and when it degrades the faucet can trigger on its own or fail to shut off. Replacing the OEM solenoid usually solves it without replacing the faucet. Call (844) 797-1112 for a written quote; estimates are free.

Can I replace just the cartridge in my Delta Monitor shower valve, or do I need a new valve? Usually just the cartridge. The pressure-balancing cartridge scales up and causes temperature drift and stiff handles, while the valve body stays sound. A new valve is only needed if the body is cracked or corroded through.

Why does my Delta kitchen faucet sprayer lose pressure over time? Mineral deposits clog the sprayer ports and aerator screen. Las Vegas water runs hard, so this builds up faster here than in most places. Cleaning or replacing the sprayer head and aerator restores flow cheaply.

What Delta shower trim kits work with a standard rough-in valve? Trim kits are matched to the rough-in valve series, not chosen freely. A Monitor 14 trim kit pairs with a 14 series rough-in, and the same pattern holds across the line. We confirm the rough-in series before ordering trim, so the two actually fit.

Is it worth repairing a Delta Foundations faucet with peeling finish? Often not. Once the finish is pitting across the body, a repair fixes the internals but leaves you with a failing surface. On a basic Foundations fixture, replacement is usually the better spend. Call (844) 797-1112 and we’ll give you a number both ways.

How much does Delta construction cost in Las Vegas? A fixture repair is a small line item; the bigger ranges are full kitchen remodeling at $14,000 – $45,000, walk-in shower installation at $4,500 – $12,000, and bathroom vanity installation at $800 – $3,000. Countertops run $2,000 – $6,500 and backsplashes $800 – $2,500. Call (844) 797-1112 for an exact quote; estimates are free.

Book Your Delta Service in Las Vegas, NV

Whether it’s a Touch2O solenoid that won’t shut off or a walk-in shower that needs a proper valve behind the tile, we’ll diagnose it, price it in writing before any work starts, and back the result for 365 days. Call (844) 797-1112 to schedule your free estimate in Las Vegas.

Written by the team at Mason Remodeling Co Las Vegas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porchA remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Las Vegas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Las Vegas team

A local vetted partner works across Las Vegas and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-1112
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Mason Remodeling Co Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch