







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs Replacement in Las Vegas, NV: Choose Replacement If Your Boxes Are Staple-Built
Choose replacement if your Las Vegas cabinets were built with staple-assembled 1/2-inch particleboard boxes, and choose refacing only if the existing boxes are solid plywood or screwed particleboard worth keeping. That single variable drives the whole decision, and it matters more here than anywhere else. In a valley home built between 1992 and 2007, the boxes are often the weak link. New doors hung on that substrate will sag or rack within two to three years, no matter how careful the refacing job is. Call (844) 797-1112 and we’ll inspect the boxes with you before either quote.
Key Takeaways
- Refacing saves real money only when the cabinet boxes are solid enough to hold new doors and drawers.
- Screws at the inside corner joints mean worth refacing. Staples alone mean replacement candidate.
- If you’re changing the layout, moving a wall, or adding an island run, refacing is off the table.
- Las Vegas thermal cycling stresses refacing veneers, and cheap material lifts at the edges within a few years.

Why the Refacing vs. Replacement Question Is Different in Las Vegas
Most refacing advice assumes your cabinets were made the way mid-century cabinets were made: solid wood or plywood boxes, joined with screws, installed to last decades. Then the advice moves straight to cost. That framing skips a step. Las Vegas grew fast in the 1990s and 2000s, and the tract housing that filled the valley was built to a price. A large share of those kitchens went in with thinner particleboard boxes fastened with staples. Builders weren’t cutting corners for the fun of it. They were putting up thousands of homes in a few years across a desert that was never meant to hold a city, and the cabinet package was one place the budget landed.
So the honest question isn’t “refacing or replacement?” It’s “are your boxes worth keeping?” Get that answer first and the rest follows. If they are, refacing is a smart, fast way to get a new kitchen. If they aren’t, refacing is a short-term patch on a structure that will fail under new doors, and you’ll pay twice.
The Box Quality Test You Can Do Yourself Before Either Quote
You don’t need a contractor to get a first read on your own cabinets. Three checks take about five minutes and give you a real starting point. Do them before anyone quotes you a number.
- Check the inside corner joints. Open a base cabinet and look where the side panel meets the bottom and the back. If you see screws holding the joint, the box was built to carry load and is a genuine refacing candidate. If you see staples only, or staples plus thin corrugated fasteners, treat it as a replacement candidate. Staple joints pull and open under the weight of a new door and its hinges.
- Tap the box sides. A hollow, papery thud usually means thin particleboard. A denser, flatter knock points to plywood or a heavier board. It’s crude, but it tells you a lot, especially on the base cabinets that carry the most weight.
- Open and close the existing doors and feel for rack. A door that rubs at one corner, or a box that twists as you pull, is already moving. That movement doesn’t come from the door. It comes from the box. New doors won’t fix it.
That last check is the one most homeowners miss, and it’s the reason refacing sometimes disappoints. If the box is flexing now, it will flex harder once you hang heavier doors and drawer fronts.

The Refacing vs. Replacement Cost Comparison in Las Vegas
Refacing costs less up front, but the gap narrows once you account for what refacing quotes tend to leave out. Here’s what the numbers actually look like in the Las Vegas market, using real ranges rather than national averages.
| Option | Typical Las Vegas range | What it includes |
|---|---|---|
| Cabinet installation (new cabinets) | $4,000-$13,000 | New boxes, doors, and hardware, installed |
| Refacing on solid boxes (new Wellborn doors + veneer) | Roughly 50-65% of a full cabinet replacement | New doors, drawer fronts, veneer, hardware |
| Full kitchen remodel (cabinets plus counters, backsplash, labor) | $14,000-$45,000 | Complete scope, one written price |
| Countertop installation (if replaced alongside) | $2,000-$6,500 | Surface and install |
The usual refacing quote covers doors, veneer, and hardware. What it often doesn’t cover is the shimming. Once the veneer and new doors go on, out-of-square boxes show up. Older Las Vegas homes settle on expansive soils, and a box that looked square can need real shimming to hang a door that closes without gaps. That shimming is labor, and it’s the most common reason a refacing quote grows after the job starts.
We don’t quote refacing to a national average, because your kitchen isn’t a national average. If your aim is a full kitchen update and the boxes are marginal, the smarter spend usually goes into Kitchen Remodeling, where the boxes, doors, and hardware all get replaced together. Our Kitchen Remodeling in Las Vegas services team can price both paths side by side.
When Refacing Doesn’t Apply at All
There’s a scenario where the refacing vs. replacement debate is moot, and it’s common in Las Vegas kitchens. If you want to move a wall, change cabinet heights, or add an island run, refacing can’t get you there. Refacing keeps the boxes where they are. It relines them. Move a wall and the boxes no longer fit the room. Change heights and the old boxes are the wrong shape. Add an island and you need new boxes built for it. In any of those cases, replacement is the only path, and the cost comparison should be made against the layout you actually want, not the one you have.
The Thermal Cycling Problem With Refacing Veneers
Here’s a durability point that doesn’t get enough attention in Las Vegas. Refacing relies on adhesive-backed veneer to cover the visible faces of the boxes. That veneer expands and contracts with temperature. Summers here run past 110°F regularly, and the jump from a hot exterior wall to a 72°F air-conditioned interior is a lot to ask of an adhesive. Lower-grade veneer can lift at the edges within two to three years under that cycle. Not every refacing job fails this way, but the risk is real, and it argues for spending the money on full replacement when the boxes are marginal anyway. No point paying for a finish that fights the climate.
Where Mason Remodeling Co Las Vegas Comes In
Our approach puts the decision in your hands with real numbers. A pre-project walkthrough includes an inspection of the actual boxes, and you get a written price for both options on your specific kitchen before any work begins. Neither price is a verbal estimate that grows on the final bill. Both options carry the 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost. Every project is handled by background-checked, identity-verified technicians, and you receive the technician’s name and photo before the visit, plus a photo ID badge at the door through The Threshold Standard. Our technicians have up to 22 years of experience. A live person answers our phone around the clock, every day of the year.
We work with specification-grade brands, so you’re choosing among KraftMaid and Wellborn doors whether you reface or replace. If the boxes stay, you can trust they’ll carry the new hardware, and if our inspection says otherwise, we’ll tell you plainly. Start with the home page for how we run a project end to end.
Refacing vs. Replacement FAQs
Refacing typically runs about 50-65% of full cabinet replacement, and full cabinet installation in Las Vegas ranges from $4,000 to $13,000 while a complete kitchen remodel runs $14,000-$45,000. Those are ranges, not quotes. Call (844) 797-1112 for an exact figure based on your boxes, and estimates are free.
Refacing is cheaper up front, but only when the boxes are solid enough to keep. If your boxes are staple-built 1/2-inch particleboard, refacing is cheaper this year and more expensive three years from now when the doors sag and you have to replace them anyway. Call (844) 797-1112 and we’ll tell you which situation you’re in.
On solid, screwed boxes with quality veneer and doors, refaced cabinets can serve well for a long time. On marginal boxes, or with lower-grade veneer under Las Vegas temperature swings, edge-lifting and door sag can show up in two to three years. A box inspection before you commit tells you which outcome to expect. Call (844) 797-1112 for a no-pressure look at your kitchen.
No, refacing only works when the layout stays put. Moving a wall, changing cabinet heights, or adding an island run all require new boxes, which means replacement. If your heart is set on a new layout, the comparison should be replacement against your vision, not refacing against your current kitchen. Call (844) 797-1112 for a written price on the layout you want.
If you’d rather have it looked at, Mason Remodeling Co Las Vegas offers a no-pressure assessment in Las Vegas. We’ll inspect your boxes, price both options in writing, and let you decide without pressure. Call (844) 797-1112 for a free estimate.
Written by the team at Mason Remodeling Co Las Vegas, serving Las Vegas, NV.


